Gilashin mayar da hankali na CO2
Aikin ruwan tabarau na laser CO2 mai mayar da hankali shine mayar da hankali kan hasken laser a kan wani wuri, ta yadda ƙarfin laser a kowane yanki zai kai babban ƙima, yana ƙone kayan aikin da sauri, da kuma cimma ayyukan yankewa da sassaka.
Madubin Laser na CO2
Injin samar da laser na CO2 laser ne na gas, ana amfani da co2 a matsayin matsakaici, kuma ana watsa hasken ta madubin laser na co2.
Allon allo
Mota
Na'urar sa ido
Kyamarar sintiri ta kan iyaka a kan yanke-yanke iri-iri
RD6445
Siga na Laser Laser CO2 1390-M6
| Lambar samfuri | 1325-M6 |
| Wurin aiki | 1300*2500 mm |
| Nau'in bututun Laser | Rufe bututun Laser na gilashin CO2 |
| Nau'in dandamali | ruwan wuka/zaki/faranti mai faɗi (zaɓi ya danganta da kayan) |
| Tsawon ciyarwa | 30 mm |
| Saurin sassaka | 1000mm/s |
| Daidaiton matsayi | 0.01mm |
| Ikon bututun Laser | 130-150W |
| Ci gaba da aiki bayan katsewar wutar lantarki | √ |
| Hanyar watsa bayanai | Tashar sadarwa ta USB U disk |
| Software | LaserCAD/RDworks V8 |
| Ƙwaƙwalwa | 128MB |
| Tsarin sarrafa motsi | Tuƙin motar Stepper/tuƙin motar servo mai haɗin gwiwa |
| Fasahar sarrafawa | sassaka, sassaka, zane-zanen layi, yankewa da yin ɗigon ruwa |
| Tsarin da aka tallafa | JPG PNG BMP DXF PLT DSP DWG |
| Yana tallafawa software na zane | AutoCAD CoreLDRAW a Photoshop |
| Tsarin Kwamfuta | Windows10/8/7 |
| Mafi ƙarancin girman sassaka | 1*1mm |
| Kayan aiki | Acrylic, allon katako, fata, zane, kwali, roba, allon launi biyu, gilashi, marmara da sauran kayan da ba na ƙarfe ba |
| Girman gabaɗaya | 3305*2180*1250 |
| Wutar lantarki | AC220V/50HZ (ana iya keɓance ƙarfin lantarki gwargwadon ƙasa) |
| Ƙarfin da aka ƙima | 2600W |
| Jimlar nauyi | 970KG |
Ka'idar aiki na na'urar Laser CO2
Co2 da aka rufe a cikin bututun laser yana samar da haske ta hanyar matsin lamba mai yawa, wanda mai haskakawa ke nunawa. Mai sanya hasken yana mai da hasken zuwa wani wuri, kuma idan ya fi ƙarfi, ana fitar da shi ta kan laser.
Injinan Laser na CO2m mai dacewakayan ado na ƙasa
1. Acrylic, itace, fata, zane, kwali, roba, allon launi biyu, gilashi, marmara da sauran kayan da ba na ƙarfe ba;
2. Ƙaramin ƙarfe: ƙarfe mai carbon, bakin ƙarfe.
Masana'antar aikace-aikacen injin CO2 Laser
Talla, bugu da marufi, kyaututtukan masana'antu, tufafin fata, ƙuraje, kayan kicin, da sauransu.
Siffofina'urar yanke laser CO2
1. An yi amfani da firam ɗin daidai gwargwado don tabbatar da hanyar gani da daidaito.
2. An raba teburin da kayan aikin injin don magance matsalar lalacewar kayan aikin injin lokacin da injin yankewa mai ƙarancin ƙarfi ya yi aiki na dogon lokaci.
3. An gama saman teburin, wanda ke magance matsalar rashin daidaiton saman tebur. Tsarin teburin mai santsi yana inganta daidaiton yankewa sosai yayin aiki kuma yana ƙara tsawon lokacin sabis.
4. Tsarin watsawa na ɓoye yana hana ƙura kuma yana ƙara tsawon rayuwar sabis.
5. Tsarin haɗin gwiwar kayan aikin jan ƙarfe yana tabbatar da daidaito da juriya ga tsatsa.
6. Allon killacewa yana amfani da kayan da ba sa iya kashe wuta don rage haɗarin gobara.
7. An haɓaka kayan aikin ɓangaren watsawa daga bayanan aluminum da aka saba amfani da su zuwa bayanan aluminum masu ƙarfi na 6063-T5, wanda ke rage nauyin katakon kuma yana inganta ƙarfin katakon.
8. Na'urar kariya daga gobara don rage haɗarin gobara.
Sassan da za a iya amfani da su
1. Gilashin mayar da hankali: Ya dogara da kulawa, yawanci ana maye gurbin gilashin ido ɗaya bayan wata uku;
2. Gilashin haske: Ya dogara da kulawa, yawanci ana maye gurbinsa bayan kowane watanni uku;
3. Bututun Laser: tsawon rai shine awanni 9,000 (A wata ma'anar, idan kun yi amfani da shi awanni 8 a rana, zai iya ɗaukar kimanin shekaru uku.), farashin maye gurbin ya dogara da wutar lantarki.
